Kaneko 2-way solenoid valve - M20 series

Product description
A solenoid valve Ni-po, in one place each valve, inlet and outlet piping is used ON the road, as the valve OFF.

Therefore, most products that use fluid pressure is generally low, less liquid 1.5MPa, 0.99MPa in the gas used in the following because it is used to directly control a liquid such as water, oil, chemicals, and gases such as air and gas is.

However, in our company, depending on the caliber, such as the type of fluid, there is also a production performance of the solenoid valve that can open and close the pressure more than 10MPa.
Series

M20 SERIES
M22 SERIES
M30 SERIES
Tweet

Feature

Mass flow rate can be obtained even in a small size. (Cv value:Up to 12.6)
Mounting orientation freedom. (360 ℃)
Precautions

For pilot-operated, should be able to ensure minimum operating differential pressure 0.05MPa or more times.
Standard specification
Fluid
Such as water, oil, air, inert gas
Working pressure
Gas 0.05～0.9MPa
Liquid0.05～1.6MPa
Differential pressure actuated
0.05MPa or more full-time
Fluid temperature
－20℃～60℃
Ambient temperature
－20℃～60℃(That the fluid does not freeze but)
Electrical ratings
Continuity
The allowable voltage fluctuation rate
＋10％，－15％
Current value
Following Table