KL-300T Splicer

Feature
1, Core to core alignment by PAS technology ( PAS:Profile Alignment System)
2, Digital fusion splicer with automatic focus function
3, Fiber core can be display clearly
4, Single X or Y view and X & Y view simultaneously
5, Auto detect cleaved endface fault
6, Display fiber cleaved and offset angle
7, Display core and clad offset
8, 5.6 inch TFT color LCD monitor with clear digital image display
9, USB & VGA interface
10, Software upgrade via USB interface
Specifications:
Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length: 8~16mm (Coating diameter : 250um)
16mm (Coating diameter: 250 ~ 1000um)
Fiber diameter: Cladding diameter: 80 ~150um
Coating diameter: 100~ 1000um
Fiber Count: Single
Fiber aligning method: Core or clad aligning
Image processing method: Digital
Actual average splice loss: 0.02dB (SM), 0.01dB (MM)
0.04dB (DS), 0.04dB (NZDS)
Splicing time: Typical 9 sec, with standard SM fiber
Splicing mode: 53(templet), 40(user)
Splice loss estimate: More accurate
Return loss: >60dB
Storage of splice result: 4000 resultsÿª20 parameter per result
Fiber display and magnification: 300Xÿ¦X or Y viewÿ§,150Xÿ¦X and Y viewÿ§
Tube heating time: Typical 30 sec
Tube heating mode: 9(templet), 24(user)
Tube heating temperature: Can be adjusted
Applicable Protection sleeve length: 60mm, 40mm and a series of micro sleeves
Tension test: 2N
Electrode life: 2500
No.of splice/heating with battery: Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screenÿº5.6 TFT inch color LCD monitor
Image change over: The fiber image is turned upside down
Terminals: USB 1.1 and VGA
Operating condition: 0 ~ 5000m above sea level, 0~ 95%RH and -10~50ý­C, respectively, Max. wind velocity of 15m/s
Power supply: AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions: 150 mm(L) x150 mm (W) x150mm (H)
Weight: 2.7 Kg excluding battery, 3.2 Kg including battery