KL-280 Splicer

Features:
1,Single X or Y view and X & Y view simultaneously
2,Fiber core can be display clearly
3,Auto check quality of cleaved end face
4,Small bulk and light weight (bulk: 150mm x150mm x160mm ; weight :3.52kg)
5,Inner light to set fiber at night
6,Simple operation menu
7,9 seconds splice time and 30 seconds heat time
8,Auto select best splicing program
9,Storage of splice result: 5000 results &3 parameter per result
Specifications:
Applicable fibers: SM MM DS NZDS
Fiber cleaved length: 8-16mm
Fiber diameter: Cladding diameter 80-150um;Coating diameter 100-1000um;
Fiber Count: Single
Fiber aligning method: Core aligning
Retum loss:>60dB
Actual average splice loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Splicing mode: auto
Typical splicing time: 9 sec ,with standard SM fiber
Splicing mode: 12 (templet), 188(user)
Tube typical heating time: 30 sec
Protection sleeve length: 60mm, 40mm
Storage of splice result: 5000 results, 3 parameter per result
Tension test: 2N
Fiber magnification: 400X (X or Y view), 200X (X and Y view)
Electrode life: 2500
No. of splice/heating with battery: Typical 130 cycles
Image change over: The fiber image can be turned over
Display screen: 5 inch color LCD monitor
Terminal: RS232
Power supply: AC 100-240V with AC adapter inner Li-battery (6600mAH)
Operating condition: 0-5000m above sea level, -10-50ý­C Max wind velocity of 15m/s
Dimension: 150mm(L)X150mm(W)X160mm(H)
Weight: 3.52Kg including battery