JASU 3-axis Linear Guide CNC Milling Machine

Machine Features
* Machine body is optimized design by computer CAD/CAM, with the structure of wide body and column.Casting by the quality Meehanite resin sand process. Times effect of aging treatment times,
* The adoption of C3 grade precise ball screws and the use of special bearing on the ball screw with pre-pull treatment as well as laser detective compensation have ensured the rigidity and precision.
* The adoption of balance weight block with motion-based device has prevented the spindle form vibration when weight-balanced block moves up and down, avoiding influencing the processing accuracy.
* The main base parts of machine are made from high-grade, high quality gray casting iron with aging treatment, the guide rails with high-frequency quenching treatment and delicate grinding ,covered with low frictional coefficient TURCITE-B and dealt with delicate scraping, having effectively improved motional quality of machine and necessary touching rigidity for cutting.

Machine Parameter

Worktable
Table size/(L*W) 1120 x 510
T-slot size/mm 100x 18 x 5
Max load on the table/kg 600 kg

Travel
Max. X/Y/Z axis travel 1000 / 560 / 510
Spindle nose to table surface/mm 110-620
Spindle nose to column surface/mm 610

Spindle
Spindle taper BT40
Max. Spindle speed/rpm (Standard) 8000 rpm
Spindle driven (Standard) Belt drive
Spindle driven (Optional) Direct Connection

Feeding
Max cutting feed rate(M/min) 10000
X,Y,Z rapid traverse 36/36/36 m/min

A.T.C
Tool magazine type Disc Type/ Hat Type
Tool magazine capacity 20/24
Max. tool diameter and length 80 x 200
Max. tool weight 8 kg
Tool shank type BT40

Servo Motor
Spindle motor 7.5/11 kW
X/Y/Z axis servo motor (Fanuc) 1.8 / 1.8 / 1.8 kW
X/Y/Z axis servo motor (Mitsubishi) 2.0 / 2.0 / 2.0 kW
Coolant motor 0.49 kW

Accuracy
Positioning accuracy 0.005mm
Repeatability positioning accuracy 0.003mm

General
Air Requirements 6KG
Power Capacity 15KVA
Measurement 2.7x2.4x2.5m
N.W. 5500 kg


Standard configuration
1. Fanuc 0i mate MD controller
2. Standard CF card interface(FANUC 0I system)
3. RS-232 interface
4. RS-232 communication line
5. Three-color indicator
6. Working lamp
7. Heat Exchanger for Electrical Cabinet
8. Air blast through spindle
9. Chip cooling device
10. Automatic centralized lubrication system
11. Tool cabinet
12. Operation manual
13. Maintenance manual

Optional configuration
1. Mitsubishi M70 controller
2. Automatic tool measurement
3. Disc type 24 turret tools
4. Hat type 20 turret tools
5. Spiral chip removal device
6. Turntable (fourth axis)
7. Voltage regulator (220/380V)
8. Spindle Cooling System
9. APO(Automatic Power Off)
10. 10000RPM(BT40)Spindle
11. 12000RPM(BT40)Spindle

After-sale Warranty
1.Warranty: 1 year for the machine
2.Replace all parts for free during the warranty period(no human damage)
3.Provide technical services to the door (We have professional engineers to offer machine installation commissioning and maintenance)