Ionizing Air Gun

ESQ1199-01
Ionizing Air Gun has the features as following:
1.Trademark: SIMCO
2.Specifications: shot, a power supply
3.Characteristics: rapid and effective elimination of the general framework of the static and dust grains separated
4.Configuration 0.01-micron filter to ensure the cleanliness of the ion flow
To eliminate static electricity at 1.3 seconds @ 6 inches
5.Wind gun weight: 185g configuration ion balance light show
6.Purpose: to quickly and efficiently to eliminate static electricity on the surface of the object
Testing Conditions
Testing Voltage Range:±5.0Kvto500V
Environment Temperature:22°C Relative Humidity:≤65%RH
Eliminate static electricity distance 30mm 90mm 150mm
Neutralize time
Positve 0.8s 1.1s 2.0s
Negative 0.9s 1.3s 2.2s
Residual voltage Positve -25V -20V -15V
Negative -27V -23V -18V
1. Body built-in high-voltage generator, forming super flexible coil and body
2. Pikestaff built-in efficiency filter (0.02um diameter of the dust can be filtered) and air flow controller (throttle) for controlling the flow size
3. Can be arbitrarily placed in the table below or above the coil deformation, so that ionized airflow to a target surface
4. Particularly suitable for use in class 100 clean room. To meet the severe needs of the microelectronics industry
5. With super flexible coil, and the overall length of 700MM, (according to demands can be longer), high-pressure electric discharge needle adopts free electric shock design
6. Use compressed air, inert gas, nitrogen
Note:Price valid for one month.
Payment :
1)TT, 30% deposit(suggest )
2)L/C (High bank charge ,not suggest, but acceptable )
3)100%TT in advance( Specially for air shipment or small amount )