Insulation MultimetersYH5110

Specifications
General Specifications
Complies with IEC/EN 61010-1 1000V CAT III ，600 V CAT IV.
1000V DC Voltage，750V AC Voltage（TRMS）.
6600 Count（except for capacitance，temperature，insulation）.
When the input terminals is V and COM,The overload protective voltage is up to AC 250 V (TRMS) ;When the input terminals is mA and COM, protective Current is 0.4A; when the input terminals is Hi and Lo , The overload protective voltage is 600V.
Batteries：Four AA batteries (NEDA 15A or IEC LR6) Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Insulation Measurement Range : 0.01 MΩ to 2 GΩ.
Insulation Test Voltages : 50, 100, 250, 500, 1000 V .
Insulation Source Voltage: + 20 %, - 0 %.
Insulation Short-Circuit Test Current : 1 .5mA nominal.
Insulation Auto Discharge : Discharge time <1 second for C = 1 μF or less.
Insulation Live Circuit Detection : Inhibit test if terminal voltage > 20 V prior to initialization of test.
Insulation Maximum Capacitive Load: Operable with up to 1 μF load.
Storage Temperature : -40 °C to 60 °C.
Operating Temperature: 0°C to 40 °C .
Storage Altitude: 12000m
Operating Altitude: 2000m 1000V CAT III,3000m 1000V Ⅱ
Temperature Coefficient: T.C. 0.05 × (specified accuracy) per °C for temperatures < 18 °C or > 28 °C.
Relative Humidity: 40%~75%.
Size: 205(L)×102(W)× 58(H)mm.
Weight: approx 390g.