IP67 20W LED DRIVER

IP67 20W LED DRIVER

20W LED DRIVER
MODEL BG-20-12 BG-20-24 BG-20-36 BG-20-48
OUTPUT DC voltage 12V 24V 36V 48V
Rated current 1.67A 0.84A 0.56A 0.42A
Current range 0 ~ 1.67A 0 ~ 0.84A 0 ~ 0.56A 0 ~ 0.42A
Rated power 20W 20.2W 20.2W 20.2W
Ripple & noise 100mVp-p 120mVp-p 120mVp-p 150mVp-p
Setup,rise,hold time 500ms, 20ms,20ms/230VAC
INPUT Voltage range 85~264VAC        120~370VDC
Frequency range 47 ~ 63Hz
Efficiency 80% 81% 81% 83%
Ac current 0.55A/115VAC     0.35A/230VAC
Inrush current Cold start 30A
Leakage current <0.5mA/240VAC
PROTECTION Overload 115 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over voltage 5.8~6.8V 28~32V 28~32V 55~64V
Protection type :Shut off
ENVIRONMENT Working temp,humidity -20℃ ~ +60℃,20% ~ 90% RH non-condensing
Storage temp,humidity -20℃ ~ +85℃,10% ~ 95% RH non-condensing
Withstand vibration 10 ~ 500Hz, 2G 10min/1cycle,period for 60min. each axes
SAFETY & EMC Safety standard Design refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC standard EN55015,EN55022,EN55024,EN61000-3-2,EN61000-3-3,EN61547 approved
OTHERS MTBF 500K hrs
Dimension 182*29*30mm (L*W*H)
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.

Contact us for more information.