Hinged Pipe Cutter ECH4

Hinged type pipe cutter series is produced by EWORK to cold cut carbon steel, stainless steel, cast iron, and nodular cast iron pipes. The ultralight body design and reasonable physical setting optimize the cutting performance. Super strengthen steel combined with special heat treatment makes the blades reach a balance- cuts faster and wears well. ECH4 is used to cut pipe from 60mm to 125mm outside diameter.

Hinged pipe cutters feature four wheels to cut steel, stainless steel, cast, and ductile iron with only 90® to 110® handle swing. Only 110 mm clearance is required around the pipe. Strong guide fingers ensure perfect wheel alignment for square cuts. A closed 360® frame on the hinged pipe cutter forces all energy into cutting the pipe for maximum efficiency. There is no shower of sparks in this cold cut. This pipe cutter is highly recommended for ductile iron, steel, and stainless steel pipe.
Application:
This series of pipe cutting machines are widely used in gas and oil pipeline repair work which requires free-spark and explosive environments, with no noise area, narrow space trench, underwater, pipe rack, etc.
Advantages:
1. The short handle suits perfectly in narrow space.
2. The solid guide frame makes straight cuts.
3. The blocking device makes the rack open easily.
4. The unique feed screw makes cutting with uniform speed and strength.
5. Super strengthen steel combined with special heat treatment makes the wheels reach a balance.
6. The design complies with the human body engineering principle makes cutting easier.
Product Features:
1. The professional pipeline cold cutting tool;
2. Pure manual operation, no sparks, safe;
3. Debris-free, clean, no risk of the valve block;
4. Suitable positioning device makes clean and straight cuts, more efficient;
5. Unique blade design, simultaneously cutting by four blades, faster and easier;
6. Simple operation procedure, no other power source required, wear well;
7. Short handle, swing range between 90 and 110 degrees, suitable for narrow working space;
8. The applicable pipe cutting machine for nodular cast iron, carbon steel, and even size 100 super thick steel pipes.