High Wear-resistance TPU

Fully support the wire pass all kinds of rocking, resilient recovery, and other tests. passed over 50000 wear-resisting tests, effectively preventing EV cable from wearing and cracking caused by repeated dragging under cement and sand conditions for a long time.

General Characteristics:

1. Environmental Friendly

HFFR materials completely comply with RoHS, REACH, Halogen-free, Phthalate (16P) Dimethyl Fumarate, PFO&PFOS, TBBPA, PAHs, EN71, etc. regulations, and rules.

2. Outstanding Flame Retardant

UL94 5VA-V0 (1.5mm) level, can firmly support wire and tube pass CSA FT-4, UL VW-1 and etc.

3. Excellent Physical Properties

UL 80℃-125℃ heat-resistance can firmly support wire & cable to pass UL 1581/758/62 and non- migration test, the properties are beyond the reference values of flexible wire standards.

4. Perfect-Surface Effect

Fine and smooth appearance and soft-touch feel, resolve the common defects such as heterogeneous, pits, whiten, sticky and etc.

5. Good Printable

High surface tension and polarity, can apply the main halogen-free ink to obtain good adhesion and scratch resistance, stand by UL2556.

6. Easy Processing

High efficiency and processing performance, can achieve 60~100m/min rate using the same size extruder of PVC and decrease the probabilities of the cast, pellet, bulge, pits, etc. common defects significantly.

7. Stable Quality

Long-term experience of R&D processing and application based on ISO9000 and 14000 quality systems.


Technical Data of High Wear-resistance TPU
Technical Data Sheet Model
Material Properties Test Standard Test Condition Unit 1190F-EHS-1076S
General Characteristics Material Category - - -
Appearance(Light/Semi-matte/Frosted) - - -
Extrusion/Injection - - -
Physical Characteristics Hardness ISO 48 15S Shore A 90
Proportion ISO 1183 - g/cm± 1.128
Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 10
Brittle Temperature ISO 812 - ℃
Mechanical Properties Elongation ISO37:2017 200mm/min % 425
Tensile Strength ISO37:2017 200mm/min Mpa 48.53
Tearing Strength ISO34-1:2015 500mm/min KN/m
Hot Air Aging Elongation Retention Rate ISO37:2017 - %
Tensile Strength Retention Rate ISO37:2017 - %
Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm
Permittivity ASTM D150 - -
Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm -
Oxygen Index ASTM D2863 - %

As a professional polymer compound manufacturer, we provide tpe elastomer, tpe elastomero termoplastico, tpu surface, tpu plastic material, tpu plastic and etc. For more information, please feel free to contact us!