High Quality Hot Melt Adhesive for Mirror

Yuxiang hot melt adhesive is widely used in Make-up mirror, glasses cases, candle wicks fixed, craft decoration fixed etc, for its outstanding performance and environmentally-friendly feature.



Product name: High Quality Hot Melt Adhesive for Mirror



YX-704C hot melt adhesive for make-up mirror







YX-528D hot melt adhesive for make-up mirror



L-528D, light yellow transparent,is applied to make glass and plastic stick together in make-up mirror. It is characterized by good adhesive strength, as well as cost-effective. This product is more economical than others



Instruction:



1. Recommended method: spot coating or roller coationg
2. 704C recommended operating temperature: 165-175°C; 528D recommended operating temperature: 150-160°C
3. You can consult to the manufacturer if carbonized in adhesive boxes or tubes. Or you can clean it by mineral oil below temperature 120°C.
4. Via adjusting the temperature to adjust adhesive density when coating.
5. Don’t use it mixly together with other brand adhesive.
6. To avoid to be contaminated, you must close the cover immediately after adding hot melt adhesive to the tank.


Safety Precautions:


1. Workers should wear safety glasses and heat-resistant gloves when thermal operation like adding hot melt adhesive to the tank.
2. This product’s operating temperature must be below 200°C at any time.
3. The use of premises should be well-ventilated and banned all open flames.



Storage:



Store in a cool, dry environment and away from direct sunlight. Storage temperature should be below 35 ° C and far away from fire and heat source.



Guarantee period:



In the storage conditions described above, the hot melt adhesive can be stored for 12 months.


Packing: 25KG / box: inside the package about 0.45KG /PC