High Accuracy Clamp Leaker

Technical Specifications

Function
Measurement of AC leakage current, AC current and on-line AC current

Power
DC3V Button-type battery LR-44ÿ? or SR-44ÿ?

Test Mode
Clip-on CT¡«integral mode

Display Mode
Four Bits LCD display

Dimension
Width ÿ?Heightÿ?Thickness¡º
64mmÿ?60mmÿ?3mm

LCD Dimension
35mmÿ?1.5mm¡»display domain¡º32mmÿ?5mm

Clamp Mouth
¥Õ40mm

Sampling Rate
about 2 times/s

Range
0.00mAÿ?00.0A¡§50/60Hz¡¨

Resolution
- 4 -0.01mA

Measuring range
30mA/300mA¡«30A/300A¡«second-range manual switch¡«Automatic switch in all ranges

Measurement accuracy
(below 23ÿ??ÿæ¡?
70%RH¡¨
0.00mAÿ?.99mA: ÿ?.2%ÿ?dgt

10.0mAÿ?00.0mA: ÿ?.5%ÿ?dgt

0.00Aÿ?.99A: ÿ?.2%ÿ?dgt

10.0Aÿ?9.9A: ÿ?.5%ÿ?dgt

100.0Aÿ?99.9A: ÿ?%ÿ?dgt

200.0Aÿ?00.0A: ÿ?%ÿ?dgt

Line voltage
Line test under AC600V

Data Storage
60 groups, ÿ¯FUÿ?symbol flickering means storage is full

Peak Holding
Peak value capture and holding function, press HOLD button continually to show peak value in the course of testing.

Data Holding
Data holding function¡ºdisplayed by ÿ¯DHÿ?symbol

Overflow display
- 5 -Outrange overflow display¡ºdisplayed by ÿ¯OLÿ?symbol
Automatic shutdown
After starting up the leaker for 5 minutes, it will shut down automatically to reduce battery consumption.

Battery voltage
When battery voltage reduced to 2.5Vÿ?.7V, battery low voltage symbol will filker to remind replacing battery; at this time, measurement accuracy will decrease.

Leaker Quality
About 120g¡§with battery¡¨

Rating Power
about 5mW

Working temperature and humidity
-0ÿ??0ÿæ¡»below 80%rh

Storage temperature and humidity
-10ÿ??0ÿæ¡»below 70%rh

Insulation strength
AC2kV/rms (between core and box)

Applicable safety rules
IEC1010-1ÿ¢IEC1010-2-032ÿ¢pollution, etc 2ÿ¢CAT ¢ñ(600V)