Heavy Textile Wallpaper Glue Powder

Heavy Textile Wallpaper Glue Powder

Wallpaper adhesive
It has strong paste,non-toxic,until- mildew,made of potato,environment friendly product.Can easy mixing and quick dissolve in cold water,suitable for various different kinds of wallpaper.such as common wallpaper,glass fiber wall covering,weaving wallpaper,thick and heavy wallpaper and metal wallpaper etc.

Technical Data
Density: 300-350kg / m3
pH: Approx 9
Quality quarantee: 36 months
Viscosity: 15000-18000 mPa.s

Application
Dilute enough powder into (tap) water using the chart below. Stir to achieve a smooth consistency. Leave mixed product for approximately 5 minutes. After that,stir it again and it is ready-to-use.
Apply the adhesive to the wallpaper,follow wallpaper's instructions. Starting from the top,roll paper in place,taking care to roll out air bubbles. Immediately remove excess adhesive and any adhesive on pattern side with damp cloth.
After dissolving adhesive may be stored for 7 days in closed bucket. Stir very well before use when was stored more than 1 day.

Usage
It requires wall neat clean,dry,no solid,no hole,strong and no dust. First put the powder into percent clean water,churn half minute make sure the powder completely absorb,after three minute then churn. Use the brush to paste mixed glue on finished cutting wallpaper,full of the surrounding,fold and stress two sides five or six minutes so that the paste completely infiltrate the back of paper then it can paste on wall. First should put the wallpaper's top,use drawknife from up and down,from middle to two sides extrude air bubble. Use wet towel take the extra paste out of the surface wallpaper.