Hammer crusher

Introduction
Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. Hammer crusher is mainly used in industries such as cement, coal separation, electricity generation, building materials and compound fertilizer, etc. Our hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure.


Features
Large reduction ratio and adjustable product size.
The hammer head is with nice wear-resistance and impact resistance.
Simple structure and high productive efficiency.
Application
Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. Hammer crusher is mainly used in industries such as cement, coal separation, electricity generation, building materials and compound fertilizer, etc. 
Working principle
The main part of hammer crusher is rotor. Rotor consists of main shaft, disc, pin roll and hammer. Motor drives rotor to rotate at a high speed. Materials are fed into crusher and crushed by the rotor. There is a screen deck at the bottom of rotor, the products that reach the target may discharged through screen deck, and the coarse particles may stay on the deck for crushing until reach the target.


Technical parameters
Model Number of
hammers(piece) Feed particle size (mm) Discharge particle size (mm) output (t/h) power(kw) weight (t)
PC400×300 16 <100 <15 5-10 4P-11 0.8
PC350×500 20 <100 <15 8-15 4P-18.5 1.2
PC600×400 20 <220 <15 10-25 4P-22 1.5
PC800×600 24 <350 <15 20-50 4P-55 3.8
PC800×1000 20 <400 <15 20-75 4P-75 5.5
http://www.ytxinhai.com/en/
http://www.xinhaimining.com/en/