HDPE 7000F

FEATURES of Innoplus Hdpe:
High density polyethylene film grade
High mechanical strength
Good stiffness
Good heat seal ability

APP:
Shopping bags
T-Shirt bags
Bags on roll
Garbage bags
Re-seal able bags
Sanitary bags
Plastic gloves

Typical Properties of Hdpe Innoplus:
Properties Value Unit Test Method
Physical Properties      
Melt Flow Rate (190oC, 2.16 kg) 0.04 g/10 min ASTM D1238
Density 0.956 g/cm3 ASTM D1505
Vicat softening point @ 10 N, 50oC/hr 125 oC ASTM D1525
Melting Point 129 oC ASTM D2117
Mechanical Properties      
Tensile Strength @ Yield 300 kg/cm2 ASTM D638
Tensile Strength @ Break 390 kg/cm2 ASTM D638
Elongation @ Break 820 % ASTM D638
Stiffness 9500 kg/cm2 ASTM D747
Flexural Modulus 12000 kg/cm2 ASTM D790
Notched Izod Impact Strength 30 (NB)* kg.cm/cm ASTM D256
Durometer Hardness 64 Shore D ASTM D2240
ESCR (Condition B, 25 % Igepal) > 2000 hrs, F50 ASTM D1693
FDA Statement:
HDPE under the brand Inno Plus complies with U.S. FDA 21 CFR 177.1520 regulation for polyethylene used in articles that contact food except for articles used for packaging or holding food during cooking.

STORAGE

Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.
Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.