HD-9 Power Plug Integrated Tester

Product explanation:
This tester is a integrated tester for plug.It is used to test the continuity,polarity,insulation,high-volt,leakage current of power plug. It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC,etc.It is a totally automatic testing machine makes your operation more convenient and simple.

Features:
* All of the test subjects will done automatically.
* The inner/outer high-volt output value and persistence period can be adjusted separately.
* Test speed is quick,all test subjects will be achieved less than 2 seconds.
* The PLC control system comes from Mitsubishi,Made In Japan.
* The relay comes from Schneider,Made In French.
* If the specimen is incompetent,there is a alarm by buzzer and light.
* If the specimen is incompetent,this machine will stop at once and show you which subject is incompetent.Until you push the emergency button it will restart a new test.And a switch with key can be made to order to replace the high-volt starting button,it is very useful,because when a alarm happen,the operaters can not restart this machine,only after managers have checked over and restart it by the key the machine will work again.
* When test over,the specimen will be pushed out automatically,and a ÿ¯Tÿ?or other characters could be marked on it(English characters only).

Technical parameter:
Polarity test :Test E,L,N wires in sequence
Insulation test high-volt: DC 500V +- 10%
Insulation resistance:2,7,20,50,100M¥¸(can be made to order)
Inner high-volt:0~5KV +-5% (adjustable)
Outer high-volt:0~5KV +-5% (adjustable)
Leakage current:0.5,1,3,5,10mA(can be made to order)
Rated power:500VA
Cylinder power:compressed air with 0.4 to 0.6Mpa
Dimensions:675mm W,480mm D,520mm H
Power source:AC 220V +-10%,50Hz
Weight:35 kg, approximate

NOTICE:
1,Inner high-volt is applied between L,N,E wires,and the outer high-volt is applied between L,N,E wires and jacket.
2,Both 3-wire and 2-wire power plug can be tested by this machine.