HD-5010 Flame Test Chamber

Product explanation:
This machine was strictly designed and manufactured to meet the requirements of UL1581ÿ¢ASTM D5025 and ASTM D5207 standards. It is used to test the resistance on fire of cable,wire and other insulation material. This test is specified in UL1581 as ÿ­Flame testsÿ?

Features:
* This machine can record the burn time and finish experiment automatically.
* It can open and close the exhaust system automatically.
* Both FT and VW test can be performed by this machine.
* A big window in the door makes viewing more convenient,and you can check the samples by two gloves .
* Flame calibrating system is available.
* Controled by PLC,and the touch-screen makes your operation more convenient and simple.
* The burner is made in USA.
* The flowmeter is made in Japan.

Technical parameter:
Power source: AC 220v 50Hz 3A.
The interior capacity:4.5 m3.
The capacity above the flame:2 m3.
The inner diameter of burner:9.5+-0.3 mm.
The burner tilted angle: 90 or incline 20.
Gas:firedamp(at least 98.0percent pure,provided by clients).
Clamps:3 sets.
Burning times:0~999 times adjustable.
Burning times precision:+-1time.
Burning period:0~999.9 s(standard requires 15s).
Fire OFF period:0~999.9s(standard requires 15s).
Cable on fire timer:0~999.9s(controled by button and displayed by touch-screen).
Flame calibrating time:54s+-2s or 84s+-2s(UL standard requires flame temperature must be rised from 100C to 700C in 54s+-2s).
The measuring range of flowmeter:0~1000ml/min.
Flowmeter precision:2%.
Flame height (VW-1 and FT-1):125 mm.
Flame height (FT-2):50 mm
Thermocouple temperature:0~1300C.
Exhaust system power: compressed air with 0.4 to 0.6Mpa.
Exterior dimensions:1700ÿ?400ÿ?550 mm(WÿÁDÿÁH)