HD-10B power plug integrated tester

HONGDU TESTING EQUIPMENT CO.,LTD.
HD-10B Power Plug Integrated Tester


Product explanation:
This tester is an integrated tester for plug. It is used to test the continuity, insulation, high-volt, leakage current of power plug. It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc. It is a totally automatic testing machine makes your operation more convenient and simple.



Features:
* All of the test subjects will done automatically.
* The inner/outer high-volt output value and persistence time can be adjusted separately.
* Test speed is quick, all test subjects will be achieved less than 2 seconds.
* The PLC control system is come from Mitsubishi, Made in Japan.
* The relay is come from Schneider, Made in French.
* If the specimen is incompetent, there is an alarm by buzzer and light.
* If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent. After you push the emergency button it will restart a new test. And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operators can not restart this machine, only after the managers have checked over and restart it by key the machine will be working again.
* When test over, the sample will be pushed out automatically, and a “T” or other characters will be marked on it(English characters only).
* Cord set which both have a plug and socket can be tested by this machine.

Technical parameter:
Polarity test Test E,L,N wires in sequence
Insulation test high-volt DC 500V +-10%
Insulation resistance 2,7,20,50,100MΩ(can be made to order)
Inner high-volt 0~5KV +-5% (adjustable)
Outer high-volt 0~5KV +-5% (adjustable)
Leakage current 0.5,1,3,5,10mA(can be made to order)
Rated power 500VA
Cylinder power compressed air with 0.4 to 0.6Mpa
Dimensions 750mm W,540mm D,520mm H
Power source AC 220V +-10%,50Hz
Weight 40 kg, approximate

NOTICE:
1,Inner high-volt is applied between L,N,E wires, and the outer high-volt is applied between L,N,E wires and jacket.
2,Both 3-wire and 2-wire power plug can be tested by this machine.

Test Objects:
Power Plugs