Great Planes 1.60-50cc Reactor ARF

This is the Great Planes 1.60-50cc Reactor ARF Airplane. This airplane is ideal for a flyer's first giant scale aerobatic and 3D airplane and is IMAA Legal.

The Great Planes Reactor has excelled under electric and glow power, as a biplane and a mono-plane. Now it really hits the big time by expanding to IMAA-legal dimensions with performance that's better than ever. At low speeds, the giant-scale Reactor flies true and solid. But for an all-out 3D machine, install a 50 cc gasoline engine and increase the throws!

Includes:
Pre-built and covered wings, fuselage and tail assemblies, pushrods, landing gear, wheels, wheel pants, cowl, fuel tank, wood servo trays, aluminum spinner two decal sheets, hardware package, photo-illustrated instructions

Requires:
Engine: 1.60 - 2.10 cu in (26 - 34cc) two-stroke OR
2.00 - 2.20 cu in (33 - 36cc) four-stroke OR
2.5 - 3.0 cu in (43 - 50cc) gasoline OR
80-75-230 Outrunner Brushless Motor
Radio: 5-6 channel, 6-channel computer radio recommended
Servos: Eight, 7 high-torque, 1 standard ball bearing
6" (152mm) Heavy Duty Servo Extensions: Two/inboard aileron control
24" (610mm) Heavy Duty Servo Extensions: Two/outboard aileron control
36" (914mm) Heavy Duty Servo Extensions: Three for tail servos
1.5" (38mm) Large Scale Single Side Servo Arms: Seven
Y-Harness: Two heavy duty
Receiver Battery: 4.8 or 6V at least 4200mAh
Heavy duty switch harness and charge jack
#4 Plastic Washers: For cowl
Misc. Items: Building and field equipment



Features:

Made of laser cut balsa and plywood with a foam sheeted turtle deck
Two-piece wings that bolt-on with aluminum joiner tube
TopFlite MonoKote covering
Pre bent aluminum landing gear, 0.16" (4mm) thick
Main wheels, 3.5" (88mm) diameter foam, tailwheel, 1" (25.4mm) rubber
Radio compartment's hatch removes easily with four bolts
Aluminum spinner, 3.25" (82.5mm) diameter
Painted fiberglass cowl
Painted fiberglass wheel pants
Clear molded plastic canopy
Dual servo aileron control
Dual servo elevator control
Approximately 24oz (720cc) fuel tank for glow fuel, must purchase gasoline conversion kit and tubing if using gasoline engine
Two piece composite engine mount
Full set of hardware is provided, IMAA legal
Assembly Time: Only 15-20 hours
Warranty Period (through the manufacturer): Great Planes guarantees this kit free from defects in both material and workmanship at the date of purchase.