Grade 80 Alloy Load Chain EN818-7 for Chain Block

Definitions to European standard EN 818-7
For the purposes of this Part of EN 818,the following definitions apply:

1. nominal size: Nominal diameter of the round section steel wire or bar from which the chain is made.
2. material diameter: Diameter of the material in the chain link as measured.
3. weld diameter: Diameter at the weld as measured.
4. length dimensionally affected by welding: Length on either side of the center of the link, affected by welding.
5. pitch: Internal length of a link as measured.
6. manufacturing proof force(MPF) of chain: Force to which during manufacture the whole of the chain is subjected.
7. breaking force( BF): Maximum force which the chain withstands during the course of a static tensile test to destruction.
8. working load limit (WLL) of chain: Maximum mass which the chain hanging vertically is authorized to sustain in general lifting service.
9. total ultimate elongation (A): Total extension at the point of fracture of the chain expressed as a percentage of the internal length of the test sample.
10. processing: Any treatment of the chain subsequent to welding, for example, heat treatment, polishing or dimension calibration.
11. lot: Specified quantity from which test sample(s) is/are selected.
12. competent person: A designated person, suitably trained qualified by knowledge and practical experience, and with the necessary instructions to enable the required examination to be carried out.
Code No. Size
mm Pitch Width Length for 11 ×Pitch WLL Proof Force Min. Breaking Load Weight
mm Internal Min. mm External Max. mm mm T kN kN Kg/m
DS-C0001H 4 12 4.8 13.6 132 0.5 12.6 20.1 0.35
DS-C0002H 5 15 6 17 165 0.8 19.6 31.4 0.55
DS-C0003H 6 18 7.2 20.4 198 1.1 28.3 45.2 0.78
DS-C0004H 7 21 8.4 23.8 231 1.5 38.5 61.6 1.06
DS-C0005H 8 24 9.6 27.2 264 2 50.3 80.4 1.38
DS-C0006H 9 27 10.8 30.6 297 2.5 63.6 102 1.78
DS-C0007H 10 30 12 34 330 3.2 78.5 126 2.2
Welcome to buy the newest and cheap DAWSON g80 alloy load chain forged super alloy steel from our factory. We're one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.