Good Quality Forging Beam/Press Plate for Coal Mining Conveyor

15GL3-2 beam is used for 15GL3-1 scraper on 1000 main engine. This beam is divided into ball and socket and flat socket, which is commonly used in the market, while ball and socket are used for individual mines due to the different size and appearance of underground environment. Many parts of the same figure number mine will be due to the working face to change the details and scraper conveyor to cooperate with the use.

Most scraper conveyor beam material is 40Cr. There are two main production techniques for the beam of the scraper conveyer: forging and casting. Casting is the casting of molten metal liquid poured into the mold, cooling and solidifying to obtain the desired shape and performance of the parts. Casting is a common manufacturing method in mechanical manufacturing. But the products produced by casting process may have cracks, pores, slag holes, sand holes, shrinkage holes and so on. Forging can avoid the loose phenomenon in the casting process and optimize the metal structure. Forged parts have better strength and toughness. Therefore, the mechanical properties of forgings are better than those of castings of the same material.

As the transmission parts of the scraper conveyor, the cross beam is connected with bolts, which has large load, severe working conditions and easy wear and tear.

Do you know the 15GL3-2 beam of the scraper conveyer after reading it? Double of henan machinery equipment co., LTD., production of major host manufacturers supporting the scraper conveyer beams, elaborate threaded hole shape, size, and form a complete set of forging connecting bolts, threaded hole and the bolt clearance reduction, reduced beam string, the connection between the beam and scraper and firm, to prolong the period of beams, reduce consumption of scraper conveyor accessories for the general customers.