Gear Oil Service Pump

Detailed Product Description

Oil Service Pump Techincal Paremeter

Type Meaning&Technical Parameter:
a) Caliber: DN100-DN400mm
b) Flow:70-3600m3/hr
c) Head:3-75 m
d) Rotate speed:1450-2900r/min
e) Motor power:2.2-55 KW
f) Working temperature: ≤200°C

Ex: 6/4D-G(or GH)

6: Suction diameter(inch)

4: Discharge dianmeter(inch)

D:Bracket form

G: Gravel pump

GH: High-head of gravel pump



a) Caliber: DN25-DN300mm
b) Flow:5-800m3/hr
c) Head:12-60 m
d) Rotate speed:1450-2900r/min
e) Motor power:2.2-55 KW
f) Working temperature: ≤300°C

g) Material: cast iron, stainless steel





Mainly Usages :





Gear oil pump is used for the conveying of various oil working fluids, such as petroleum oil, heavy oil, etc. with liquid temperature not more than 300, but it is not suitable for oils which are corrosive or contains of high sulfuric content, containing hard granular impurities, or fibers, and oils which are highly volatile , have low flashing points, such as working fluids of benzene.

Standard pump group is installed on cast-iron base after connected with 3-phase motor by flexible shaft coupling.