GPS vehicle tracker PCB

Specification:
Size: 34.6*40.2 mm
Working voltage: 6 to 30V DC
Input fuse: 2A
Working temperature: -40 to 85®C
Humidity: 10% to 90% RH
CPU: MT6261(260MHz)

GSM module:
Highly precise and low noise RF transmitter for GSM/GPRS applications
Transmitter outputs support quad bands: 850/900/1800/1900MHz
GPRS class 12



GPS module:
GPS chip set: U-BLOX 8
Fast acquisition
operational temperature from -40®C to +105®C,
lowest current consumption
Navigation sensitivity: –167 dBm
Improved jamming immunity, spoofing detection


6 I/O cables
1. Positive 6V-30V. red wire
2. Negative. Black wire
3. Remote cut off engine power, yellow wire
4. Input detection #1. Green wire
5. Output negative. Orange wire
6. Input detection #2. Blue wire


Current:
Sleep mode: 5mA
working current: 60 to 150mA
Charging current: <500mA maximum

Installation:
1. Red wire connects to positive 6V-30V。
2. Black wire connects to ground
3. Yellow wire connects to relay device pin86. Pin85 connects to ground. Pin 30 and 87A connect to oil pump line in series.
4. Green wire connects to ACC or other alarm devices (that is to connect 6V-24V storage battery or impulse to access ACC and alarm mode) (input #1)
5. Orange wire connects for output negative (optional) (output #2)
6. Blue wire connects for input detection (optional) (input #2)


Main features:
1. Small size
2. Accurate locating
3. Easy installing
4. Blind area compensation
5. Power saving mode
6. Support UDP & TCP protocol
7. Support GPS & Glonass system

Advantage:
1. Fast and accurate locating
2. Low power consumption
3. Built-in reset controller ensures system not stuck
4. High sensitivity G-sensor
5. Self-recovery fuse to protect circuit from short circuit.

Main functions:
1. LBS, GPS and A-GPS tracking
2. Real-time Tracking
3. Geo-fence
4. Remote controlling fuel/power supply
5. Engine ignition detection
6. Vibration detecting alarm
7. Over speed alert
8. External power cut alert
9. Audio monitoring (optional)
10. SOS alarm (optional)
11. Car door open alert (optional)