Drilling And Tapping Type Central Machine

Equipment features:

1. Three wire rail structure, large lead screw, 16T umbrella type tool magazine, mature and stable drilling and tapping machine structure.

2. Spindle speed ≥ 12000 rpm, three-axis fast moving speed ≥ 48 m/min.

3. Conventional threaded holes made of aluminum alloy M3~M8 can be tapped within 1.3 seconds.

4. It looks light. Because of the high speed of the cutter, the cutting speed is fast, and the processing efficiency is higher.

5. Wide base, large herringbone column, fully optimized design, enhanced functions and significantly improved performance.





Equipment parameters：

Entry name
TDC540 TDC740
Worktable size (length * width) mm 600*400 800*400
Table stroke (X.Y.Z) mm 510*400*310 700*400*400
T-slot size (number size * spacing) mm 3-14*100 3-14*100
Spindle taper hole
BT30 BT30
Spindle speed rpm 20000/24000 (Optional)
Magazine capacity
16 16
Tool to tool exchange time sec 2.8 2.8
Maximum cutting speed m/min 10 10
Fast moving speed m/min 60 48
Distance from spindle center to column guide rail mm 460 400
positioning accuracy mm ©0.003 ©0.003
Repetitive positioning accuracy mm ©0.002 ©0.002
Total power kw 15 15
Worktable bearing kg 200 250
Net weight of machine tool kg 3200 3500