Double-Sided PCB

Key Specifications/Special Features:
1.Layers: 1 to 12
2.Base materials: BT, Kapton, G10, FR4, CEM-3
3.Base copper thickness: 1/3 oz to 3 oz
4.Minimum thickness:
o Double sided: 0.10mm/0.004 inches
o Four layers: 0.40mm/0.016 inches
o Six layers: 0.55mm/0.022 inches
5.Maximum panel size: 406 x 610mm/16 x 24 inches
6.Minimum hole diameter: 0.20mm/0.008 inches
7.PTH hole tolerance: 0.05mm/0.002 inches
8.Aspect ratio: 6:1
9.Blind or buried via: yes
10.Minimum line width: 0.051mm/0.002 inches
11.Minimum line spacing: 0.051mm/0.002 inches
12.Minimum bonding pitch: 0.181mm/0.007 inches (center to center)
13.Minimum SMT pitch: 0.40mm/0.016 inches (center to center)
14.Mechanical fabrication:
o Minimum hole registration tolerance (NPTH): +/- 0.025mm
o Minimum hole registration tolerance (PTH): +/- 0.075mm
o Minimum pattern registration tolerance: +/- 0.05mm
o Minimum S/M registration tolerance (LPI): +/- 0.075mm
o Minimum annular ring: +/- 0.025mm
o Minimum S/M bridge (LPI): 0.1mm
o Plated gold thickness: 0.025um - 3um