Digital Stud /Metal AC Wire Detector (JT-906)

JT-906
1. Simple push button indication
2. Power on LCD symbol indication
3. Locate stud with audio and LCD moving segment indication
4. Normal scan and deep scan button push selection
5. Different audio output and LCD symbols indication

JT-900
Turn using a coin
Insert the battery in the sleeve and close(battery not included).
Turn on the device by turning the wheel.
Keep turning the wheel till the indicator light comes on and alarm on.
Make certain that no metal or conductive object is near. Turn the wheel in the reverse
Direction until the light off and the alarms stop. The device will then be ready to use.
If the indicator light does not work, turn the wheel a half turn and slowly turn the
Adjustment resistor using a screwdriver until the alarm comes on or goes off
According to the desired setting.
To detect metal objects, hold the device as shown and move the device horizontally
Against the wall. The alarm will come on when there is a metallic object nearby.
Electrically conductive objects will be indicated by a flashing light that will become
Continuous when the device is close to the conductor.

JT-901
Use a special sensor that pinpoints the edges of wood
Studs behind walls or ceilings
Calibrates instantly for immediate use.
Bright LEDs and an audio signal indicate stud edges.
Made to withstand daily jobsite use.
Fashionable design for easy to use and hold

JT-902
Utilizing the procedure of scanning and marking from two
Sides, JT-902 will find the center of wood or metal studs or live
Wires through 3/4 inch surfaces within 1/8 inch accuracy.
Battery Life: 1 year with normal use
Water Resistance: Water resistant, but not waterproof.
Operating Temperature: +20oF to +120oF (-7oC to +49oC)
Storage Temperature: -20oF to + 150oF (-29oC to +66oC)
Dimension(LxWxH): 223x92x45mm
Weight (with battery): 250g

JT-903
Simple push button operation
Power on LED indication
Locate Studs with audio/visual (LED ) indication
Different audio output while detect studs and metal
DC 9V battery operated

JT-904
Easy to use
Adjustable detection
Control an power ON/OFF
Low battery indication
Power on LED indication
Quick detect metal with audio / visual indication
High detection sensitivity
DC 9V battery operated

JT-819
Car Park Video/Audio Indicator
Suitable for Home garage/Car park usage
Three stage LED indication for car parking ( Red/ Yellow/ Green )
Green light for 5 meter indication
Yellow light for 1.5 meter indication
Red light and alarm sound on for 0.5 meter indication
External DC input option
DC 9V battery operated ( not included )