DTG-E2 Gyroscope for dynamic well logging

DTG-E2 Gyroscope for dynamic well logging

This dynamically tuned gyro is designed for the case of the drilling field, have overcomed the following technical difficulties, its operating temperature up to 100 degree centigrade. In the drilling field, inertial devices is greater and more adaptable than flying field, because of its poor working conditions, especially the higher environmental temperatures, therefore, the temperature of adaptation and life requirements are very serious.
Specifications:
N0. Item Specification
1 Performance
Parameter Random Drift (1σ) ≤0.3°/h
Drift Stability (1σ) ≤0.2°/h
g-independent ≤12°/h
g-dependent ≤3°/h
Frequency Response ≥60Hz
2 Technological parameter Power Supply(Three Phase) 400 Hz
12 V
Power Supply(Single Phase) 16 KHz
7 V
Synchronous Speed 12,000
Power for Start Up 4 W
Operating Current ≤0.18 A
Synchronizing Time ≤10 S
Output Gradient 14 mv/’
Master torquer 7Ω
Vice control torquer 2Ω
3 Torquer scale factor Master torquer ≥500 °/h/mA
Vice control torquer ≥10 °/h/mA
4 Max.Tracking Speed ≥200 °/s
5 Output Nonlinearity ≤0.1%
6 Life Time ≥5000
7 Operating Temperature -10～+100℃
8 Shock Overload(8ms) ≥50 g
9 Physical Parameter Dimension φ29×52 mm
Mounting flanges 30×30 mm
Weight ≤130 g