DIGITAL MULTIMETER--YH1002

FEATURES
Maximum voltage between terminals and earth ground: CATⅢ600V
Fuse protection: F 250mA/250V 10A/250V Power: 9V battery, NEDA 1604 or 6F22
Display : LCD 2000 counts, updates 2-3/ sec. Measuring method: Dual-slope integration A/D converter Over range Indication: Only figure “1” on the display Polarity indication : “-”displayed for negative polarity
Operating Environment : 0 to 40℃
Storage temperature: -10℃ to 50℃.
Low battery indication: “ ”appears on the display
Size:140mm×67mm×30mm
Weight: Approx.112g.
INSTRUCTION MANUAL
3 1/2 digit,（2000 count）LCD
Back light
When this button is pushed, the Back light of display is on. After about 10 seconds, the Back light is self-off. The Back light is on again, just push this button once.
Hold button
When this button is pushed, the display will keep the last reading and “ ” symbol will appear on the LCD until pushing it again.
Rotary switch
This switch is used to select functions and desired ranges as well as to turn on/off the meter.
“COM” jack
Plug in connector for black (negative) test lead.
“10A” jack
Plug in connector for red test lead for10A measurement.
“VΩmA” jack
Plug in connector for red (positive) test lead for voltage, resistance and current (except 10A)
measurements.