DAP monomer (Diallyl Phthalate monomer)

DAP monomer has two acrylic groups which is steady in room temperature, but highly active with heat and catalyzer. Also, it can be used to produce DAP pre-polymer which is used in thermoset plastics.

CAS NO. :131-17-9
Package: Steel drums, net 200kg/drum

Typical data:
Appearance Colorless or slightly yellow transparent liquid
Density at 20 degree centigrade (g/cm3): 1.110 to 1.114
Freeze point (degree centigrade): -70
Boiling point (degree centigrade): 105Pa)/td: >305
Flash point (degree centigrade): 160
Autoignition point (degree centigrade): 435
Viscosity at 20 degree centigrade (mPa.s): 8.5
Surface tension 20 degree centigrade, dyn/cm: 39
Refractive index 20 degree centigrade: 1.519
thermal expansion coefficient: 20 degree centigrade to 40 degree centigrade 7.6*103/degree centigrade
Solubility: Slightly soluble in water


Application:
1.Electrical connectors
2.Switches
3.Insulation
4.Crosslink agent
5.Electrical and electronic parts
6.Hot tamping foil
7.Grindstones
8.UV curable ink
9.Crosslinker
10.Dispersant
11.Plasticizer
12.Unsaturated polyester
13.Acrylic resin