Crane Lifting Clamps

Crane lifting clamps, one of the lifting tools and equipment are specially designed for positioning, hoisting, and transferring steel sheets/structures, metal/plastic drum, and various pipes in a straight-up direction or horizontal direction. As one of the top lifting clamps suppliers, TITANSUHE's lifting clamp tool are all structured with a built-in safety mechanism, which consists of a locking device, tension spring, and a lever. When pushing/pulling the lever, the crane lifting clamps safety mechanism provides constant pre-tensioning of the cam on the loads and ensures that the clamp does not slip when lifting force is applied. When a load is being lifted, the clamps for lifting force on the cam is increased by the weight of the load.

Why Choose Titansuhe be your lifting clamps suppliers?
All our crane clamps are made by laser cutting with very nice appearance, wide range of opening jaw, harden treated grip teeth, automatic mechanism locking system and industrial grade powder painting.  Still not find the clamp lifting tool you want? Contact Titansuhe lifting equipment factory for more custom solutions.

Crane Lifting Clamps Safe Use Tips

Make sure the SWL of hoist clamp is adequate. Do not exceed the rated working load limit.

Check the tooth on the jaws and be sure there is no wear or damage.

Check the lifting eyes for any stretch, wear or cracks.

Do not use plate clamps to lift load less than 20% of the rated capacity

Lift only one plate/sheet at a time

Plate must be clean and free of oil

Do not use regular lifting hoist clamp for stainless steel or aluminum plate

Do not crash the lifted cargo during lifting and transferring

Do you use single piece of horizontal lifting clamp hoist, a pair is a minimum

Never work with untested lifting clamps.

Lifting clamps used for different applications should be stored in separate places.

Lifting clamps should always be stored indoors, and never left exposed to other elements.

It will be more convenient if you put colored markings or a specific number on each hoist clamp according to its lifting capacity so that you can easily use the correct clamp for the weight.

Once a week, the hoist clamps should be inspected by the person in charge of storage, according to the specified inspection standards. Be sure to have the manufacturer perform an inspection once every two or three months.

Clamps which you have stopped using for safety reasons should be clearly marked

as defective and stored separately. They should never be left in the work area.

Be sure to record inspections in log every time they are performed.

For more information about steel wire rope, please feel free to contact us!