Connecting Rod Set, Audi 2.7T & 2.8L V6, Forged

Brand: Hurricane
Engine: Audi S4 2.7T 30V and 2.8L V6
Part Type: Connecting Rods
Center to Center Length: 154mm/6.063"
End Bore Diameter: 56.80mm/2.236"
Big End Width: 20.12mm/0.792"
Small End Bore Diameter: 21.005mm /0.827"
Small End Width: 21.92mm/0.863"
Beam Style: X-beam
Connecting Rod Bolt Diameter: 3/8"
Quantity :6pcs/set
Approximate Connecting Rod Weight: 550g/piece
Advertised Horsepower Rating: 1100hp
Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened, Polished
Pin: Bronze wrist pin bushings
Wrist Pin Style: Floating
Cap Retention Style: Cap screw
Weight Matched Set: Yes ,Balanced +/- 1g
Magnafluxed: Yes
Private Label: Yes ,available
Custom design: Yes, accept



These X-beam rods are full-machined and shot peened, they are with rifle drill design which puts a small pathway through the rod center to the wrist pin, it allows pressurized oil from the rod bearing to the wrist pin, reducing the wearing and friction between the rod and piston to extend wrist pin and bushing life. But it is not required .