Ceramic tube 2G ozone suite

1.High efficiency: adopt narrow gap discharge, high ozone convertibility, low noise;
2.Low power consumption: high voltage high frequency corona discharge, power consumption is 8~10kw. h/kgO3;
3.Small overall size: Our ceramic ozone units dimension will be less 1/3-1/2 compare to the other similar products
4.Without breakdown: The reaction tube operating voltage only is 10%of the breakdowm voltage, so it has high dielectric constant
5.Excellent quality: dielectric material adopt imported high purity alumina ceramic and formed by high temperature, with high accuracy through two times ground; flatness discharge, polytetrafluoroethene gas nozzle, anti corrosion high purity fluorine gasket, external adopt halo heating dissipation, low reduced for long time operating, long life which is nearly 20000 hours
Model TS-2GA
Power supply size(mm) 138x56x40
Input voltage DC:12V-24V;AC;110V/40-60HZ;AC:220V/40-60HZ
Output voltage. AC;2.5KV-3.5KV
POWER(W) 35
POWER FACTOR(COS￠) 94%
Reaction tube size(mm) 155x68x68;dielectric material diameter:25
Connect nozzle(mm) Gas nozzle:4x8
Cooling method Air
Cooling water flow(L/min) No need
Oxygen source flow(L/h) 1 2 3 Oxygen purity:>92%;Oxygen dew point:-40~-60℃;Exit pressure;≤0.05Mpa
Ozone density(mg/L) 34 22 16
Ozone production(g/H) 2 2.6 2.8
Air source flow(L/min) 10 Air source humidity:<10%;Air source temperature:≤10℃
Ozone density(mg/L) 1.6
Ozone production(g/H) 0.9