CWDM XFP 10Gbps Optical Transceiver Module

The Eoptolink EOLX-1696-XX series optical CWDM XFP transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of XFP MSA Rev 4.5.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. A guaranteed minimum optical link budget of 14dB is offered.
The module is with the XFP 30-pin connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the XFP MSA Rev 4.5

Features

* Supports 9.95Gb/s to 11.1Gb/s Bit Rates
* Hot-Pluggable XFP Footprint
* Compliant with XFP MSA
* 18-Wavelengths CWDM EML Transmitter from 1270nm to 1610nm, with Step 20nm
* 14dB Power Budget at Least
* Duplex LC Connector
* Power Dissipation < 3.5W
* Built-in Digital Diagnostic Functions
* Case Operation Temperature Range -5¯C to 70¯C

Applications

* 10GBASE-ER/EW 10G Ethernet
* 1200-SM-LL-L 10G Fiber Channel
* SONET OC-192 IR-2
* SDH STM S-64.2b
* SONET OC-192 IR-3
* SDH STM S-64.3b
* ITU-T G.709

Contact details
:Robert Lee

[email protected];
[email protected]

www.sfp-xfp.com

MSN ID:[email protected]

SKYPE ID:eoptolink-sfp

Tel:+86-28-85124308

Fax:+86-28-85121912

Direct:+86 13819159017