CWDM SFP+ 10Gbps Optical Transceiver Module

The EOLP-1696-XX series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of SFP+ MSA SFF-8431.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are four center wavelengths available from 1270nm to 1330nm, with each step 20nm. A guaranteed minimum optical link budget of 14 dB is offered.
The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.

Features:

* Supports 9.95Gb/s to 11.1Gb/s Bit Rates
* Hot-Pluggable SFP+ Footprint
* 4-Wavelengths CWDM DFB Transmitter, 1270nm, 1290nm, 1310nm, 1330nm
* 14dB Power Budget at Least
* Duplex LC connector
* Case Operation Temperature Range 0¯C to 70¯C
* Compliant with SFP+ MSA Specification SFF-8431
* Build-in Digital Diagnostic Functions
* Digital Diagnostic Monitor Interface Compliant with SFF-8472 MSA Specification

Applications

* 10GBASE-ER/EW 10G Ethernet
* 1200-SM-LL-L 10G Fiber Channel
* ITU-T G.709

Contact details
Robert Lee
Business Development manager
[email protected]
[email protected]
www.sfp-xfp.com
MSN ID:[email protected]
SKYPE ID:eoptolink-sfp
Tel:+86-28-85124308
Fax:+86-28-85121912
Direct:+86 13819159017