CNC Controller for Lathe--130iTc

CNC Controller for Lathe:
*Control axis: 2 axes
*linkage axis: X, Z axis
*32 bits 200MHz ARM industrial processor
*32MB user memory
* Resolution is 800 x 480; 7 inch TFT LCD display
* Real-time and all-round self-diagnosis function
* Feed per minute, feed per revolution
* Metric system, English system input mode
*linear, circular, thread interpolation command can machine metric/inch single/multi-thread, taper thread, arc thread, end-face thread, variable pitch thread, continual thread.
* Multiple compound cycle instructions, such as ex-circle rough turned compound cycle, head face rough turned compound cycle, complex type outline rough turned compound cycle, outer diameter/inside diameter /grooving compound cycle, thread cutting compound cycle etc
*Automatic backlash compensation and storage type pitch error compensation. Tool auto compensation function, tool tip radius C tool compensation function.
*Set the max speed and up-down speed of each axis independently.
*Shift of programmed unit between metric and British mode
*Setting of auxiliary axis' angle and displacement programming.
*Multiple coordinates system setting.
*Soft and hard limit function to ensure safety operation of feed axis
*English/Chinese interface are available
*Display information of current time, booting time, single piece time and running time etc
*Multiple interpolation function and M, S, T function.
*Parameter, software backup and upgrade function.

SPECIAL ADVANTAGE
>SPEED
*Max rapid traverse: 20m/min
*Max cutting speed: 10m/min
*Program preview function, realizing and seamless connectivity of program blocks

>PRECISION
*Screw pitch compensation, improving machining precision to the most

>INTERFACE
*USB port, RS232 port supply DNC function
*MPG on board or handy MPG are available.
*Dual channel control of spindle speed, can control two spindle units

>OPERATION
*Full-screen editing interface and foreground-background processing operation, which can do programming, parameter adjustment etc at the same time
*graphic preview or simulating operation before machining, coordinates and graphic display can shift freely
*Multilevel password protection, such as program, parameter protection to convenient equipment management
*Start machining at random block or tool number
* spindle speed and feeding speed can adjusted during operation.
*Compatible with popular international CNC system in instruction code and most program can be run directly without amendment
more products info, please input