Bathroom Ceramic Polyaspartic Waterproof Varnish PF600

DESCRIPTION
PF600 is solvent free,two-component, hand applied, Polyaspartic clear coating.

APPLICATION
PF600 is used in kitchen, toilet and shower room waterproofing applications.

FEATURES AND BENEFITS

Fully bonded to the tile surface
Low odor
Excellent anti-slip property
Cures fast,ready for use after 8-12 hours
Convenient application
Visible waterproofing
PROPERTIES


Color Colorless
Gloss High Gloss
Solid content by weight ≥95%
Flash Point 93℃
Viscosity 1300®168 CPS
Coverage 3 M2/KG
Tensile strength ＞15 MPa
Working time 30 Min- 2 Hour
Adhension
9.7Mpa to tile surface
4.5Mpa to concrete

Elongation at break 300%-400%


PACKAGING

PS 8800 is supplied in 2.9 kgs drum pakcages.
A=2.0 kgs B=0.9 kgs.

COLOUR
PS 8800 is colorless clear coating

APPLICATION METHOD

(a) Surface preparation& Repair

Clean the tile surface, get rid of the dust and grease

(a) Brush the vertical surface

Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly.The hight of vertical surface is recommended higher than 1.5m, coverage is 0.2 kg/m2- 0.3 kg/m2( thickness about 0.15mm-0.25mm).

Begin the process at the top of the wall and work down to the floor. Complete the walls first and then begin the process on the floor.


Brush the flooring surface
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. Recommended coverage is 0.3 kg/m2-0.4 kg/m2( thickness about 0.2mm-0.3mm). Using a natural-bristle brush, apply one coat covering all surface area evenly with a layer of PS 8800.


Ready for use
Keep the room ventilatory for 8-12 hours, then it’s open for use.