Aramid Fiber Packing

Applicable Standards:
Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.
Description
Aramid fiber packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It can resist severe media and higher pressure. The packing is lubricated with silicone based compound for quick and easy break-in.

SUNWELL P301L aramid fiber packing with insert lubricant
Without impregnation, an extremely durable, highly abrasive resistant packing. It is an idea for slurry service application.

Typical Application
> This is a universal packing which can be used for pumps in all types of industry.
> Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
> A durable packing able to withstand granular and abrasive applications.

Prime Features
> It is wear resistant but may damage the shaft if not used properly.
> A minimum shaft hardness of 60HRC is therefore recommended.
> Superior performance
> Lower frictional factor





Technical Data


Material
Dupont Aramid Fiber (with or without PTFE impregnated)

Temperature Range
-100 up to +280 oC

Process


Rotating
25 bar

Reciprocating
100 bar

Static
250 bar

Shaft Speed
25m/s

PH
2~12

Density
Appr. 1.4g/cm3