AntMiner APW5 1300W-2600W

APW5 Power Supply Unit (PSU)

The PSU Specially Designed for Bitcoin Mining from Home
Optional Custom-built PSU for Further Noise Reduction

APW5 Power Supply Unit (PSU)

We understand that a major component of noise for any bitcoin miner is the Power Supply Unit that powers it. This is why we have simultaneously designed our most advanced and silent PSU to date.

The APW5 is Bitmain’s most advanced PSU to date and is compatible with both the 220V power supply and the 110Vpower supply that is the standard in North America. It combines high efficiency and good dynamic performance into a power dense package. It also features overload, overheat, overcurrent and low voltage protection, making it well suited to 12V, = 2600W* power devices.

APW5 Parameters:
Output
DC Voltage
12.25V
Rated Current (220V input)
216A
Rated Power (220V input)
2600W
Rated Current (110V input)
108A
Rated Power (110V input)
1300W
Ripple & Noise
<1%
Voltage Regulation
<2%
Source Regulation
<1%
Load Regulation
<1%
Setup, Rise Time
<5S
Power off Protection Trip Time
>10mS
Interface Type
7pairs of 6pin PCI-E connectors. 380mm length for each PCI-E cable.
Input
Voltage Range
90-265V AC
Current Range
10.5-16.5A
Starting Voltage
100-240V AC
Frequency Range
47-63Hz
Power Factor
>0.95(full load)
Leakage Current
<1.5mA (220V 50Hz)
Protection
Low-voltage Input
90-100V AC
Output Short Circuit
Yes
Output Overcurrent (220V input)
216-255A
Output Overcurrent (110V input)
108-135A
Overheat Protection
Yes
Environment Conditions
Operating Temperature
-20 – +60?
Operating Humidity
20%-90% RH (non-condensing)
Structure
Dimensions
266mm*125mm*86mm
Weight
2.5Kg
Cooling
Fan
Forced-air cooling
Fan speed
When the temperature of the heat sink is higher than 80 ?, the fan runs at full speed