Anchorage Adhesive for heavy anchoring

Anchorage Adhesive for heavy anchoring
our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.
Ultimate-performance epoxy mortar for rebar connections and heavy anchoring
Non-toxic report & Safety appraisal report are available; the best performance in post-install rebar
Safety Anchorage Adhesive Features:
● Two-component anchoring adhesive, fast-cure, epoxy-based anchoring adhesive, nearly odorless, non-toxic, no drip, no sag, and easy clean up
● Quick load-bearing after cure, high initial bonding strength and anti-pulling capacity
● Strong anchorage bonding strength achieves the effect of embedded parts
● Higher strength than the concrete around it after cure
● Compared with other mechanical or chemical anchor, it has a larger load-bearing capacity
● There is almost no shrinkage during curing process
● No expansion stress, provide the best spacing and edge distance
● Good resistance to weather, high temperature, age, chemical corrosion, welding, seismic, flame, etc.
● Fast and easy dispensing by special double spiral mixing nozzle to ensure accurate mixing proportion
● When properly mixed, adhesive will be an even color to injection for use
● Anchorage adhesive can deal with steel bonding and rebar embeding in underwater condition to ensure underwater construction engineering quality

In addition: Nanjing Mankate has got ISO quality system certification and our product is covered by Ping’an insurance company
Safety Anchorage Adhesive Manufacturer:Nanjing Mankate Science & Technology Co., Ltd.
Standard: GB50367-2013, GB50728-2011
NJMKT promises to meet the technical requirements of the following GB50367-2013 "Design code for concrete structure reinforcement" and GB50728-2011 "Technical code for safety identification of reinforcement materials for engineering structures".