Aluminum dross recycling machine

luminum dross processing machine is a special machine that designed for the separating aluminum from aluminum
dross and aluminum slag, which is one necessary machine in the aluminum dross processing and aluminum dross
recovery. Aluminum dross processing is also one important procedure in aluminum recovery field.

There will be lots of aluminum dross generated in the melting process, which contains large amount of aluminum
from the aluminum melting furnace. If we sell them with simple dross processing, that will cause a big waste and
also it pollutes the environment. But if we use rotary furnace, grinding separation by cold dross, pressing and
manpower dross processing, these methods are not only low recovery rate, but also a big waste and it is harmful to
the environment. So it is particularly important to maximize the recovery of aluminum from the aluminum dross and
slag.

Aluminum dross is the product that slag generated in electrolytic aluminium or cast aluminum production process by
cooling and machining. Main content is aluminum (15%-20%), aluminum oxide and silicon dioxide

Aluminum dross processing machine features:
& No need for any fuel in the whole process
& To reduce the dirt, smog pollution problem with dirt and smoke ventilation equipment.
& Automatic mechanical operation, no harmful to the operator’s health.
& High efficiency for recycling rate(90% of aluminum from the ashes), short working time (10-12 minutes for finish
the separation of 200kgs-650kgs aluminum and dross)
& Small investment, big processing capacity. 500kgs-2,600kgs aluminum dross processing capacity per hour.
& Low production cost
& No pollution. Cyclone dust collector can avoid the pollution and meet the requirement of environment protection
& Make full use of aluminum dross. The aluminum processed from aluminum dross can be used for the melting.
Aluminum dross can be used as the materials of aluminum chloride series reagent. Or aluminum dross can be sold
to the subcontractor for the further processing or aluminum dross can be joint materials that replaced ice stone for
the raw materials of Electrolytic aluminium.