API610 BB2 Horizontal Centerline mounted Single Case Radially Split Petrochemical Process Pump

Standards:ISO 13709/API 610(BB2)
Operating Parameters:Capacity Q: up to 2300 m±/h ( 10125 gpm )/ Head H: up to 740 m ( 2430 ft )/ Pressure P: up to 11.0MPa ( 1595 psi )/ Temperature T: -80 to 450 ℃ ( -112 to 842 ℉ )
Features: The removal of the upper pump part is easy to maintain(no need to remove inlet and outletpipings)/ The pump shaft runs in oil lubricated rolling bearings with the rotor located by the non drive end bearing which also accommodates any residual axial thrusts from the hydraulically balanced impeller./ The shaft can be reversed to allow the pump to be driven from either side./ Seal chamber accommodates packing and multiple mechanical seal types./ Pump casing flanges according to GB/T9113.1-2010 PN25 - Other flange standards upon request/ Coupling with spacer simplifies the access to thebearing frame and the seal chamber (driving end)./ Jack screws (motor side) for an easier alignment setting