API 2 3/8" to 6 5/8" drill pipe tool joint

Tool joints are short sections of pipe that are attached to the tubing portion of drill pipe by means of using a flash welding process. The internally threaded tool joint is called a “box”, while the externally threaded tool joint is the “pin”.
API 7-1 IEU Drill Pipe Tool Joint for Well Drilling
• Minimum Yield Strength = 120,000 psi
• Minimum Tensile Strength = 140,000 psi

Because tool joints are added to drillpipe, the weight of given to pipe in many tables is the “nominal weight”. The exact weight will require adding the weight of the tool joints to the tubing portion. Since two joints do not weigh the same, it is difficult to determine the weight of a joint of drillpipe and so an “approximate weight” is used in many calculations.

API 7-1 IEU Drill Pipe Tool Joint for Well DrillingAPI 7-1 IEU Drill Pipe Tool Joint for Well Drilling

The tool joints on drill pipe may contain internal and/or external upsets. An upset is a decrease in the ID and/or an increase in the OD of the pipe which is used to strengthen the weld between the pipe and the tool joint. It is important to note that under tension, the tool joint is stronger than the tubular