AG-39 Magnetic Cylinder Sensor

AG-39 series magnetic induction sensor

AG-39 series adopts special peak-shaped screws, which can be used for most brands of T-slot cylinders such as FESTO, SMC, PARKER; the way of direct installation above the groove can save users a lot of loading and unloading time. AG-39 can be used with clamps for standard cylinders such as tie rod, mickeymouse type and round type.
Specification of AG-39 Magnetic Air Cylinder Sensor
Model AG-39DF AL-39N AL-39P
Switching Logic Normally Open Solid State Output, Normally Open
Output Type 2 Wire Solid State NPN Current Sinking PNP Current Sinking
Voltage Range 10～30V DC 5～30V DC
Sensor Current 1～50 mA 0～200 mA
Switch Rating 1.5 W Max. 6 W Max.
Consumption / 3 mA Max.@24V
Voltage Drop 2.65V Max.@50mA DC 0.5V Max.@200mA DC
Leakage Current 90 μA Max.@28V 0.01 mA Max.
Indicator Red LED Red LED Green LED
Cable Φ2.8, 2C, Grey Oil-Resistant PUR Φ2.8, 3C, Grey Oil-Resistant PUR
Sensitivity 40～800 Gauss 40～800 Gauss
Sensor Frequency 900Hz 900Hz
Temperature -10～70℃ -10～70℃
Shock 50G 50G
Vibration 9G 9G
Ingress Protection IP68 (BJ-R200810105A-02) IP68 (BJ-R200810105A-02)
Protection Circuit Surge Suppression Power Reverse Polarity; Surge Suppression
CE Certificate NO. E8A 17 04 53334 007 E8A 17 04 53334 008
CNEx Certificate NO. CNEx21.2238X CNEx21.2239X
RoHS2.0 NO. RoHS 2011/65/EU & (EU) 2015/863
Reach NO. (EC) N 1907/2006 (REACH)

ALIF Sensor is mounted on the cylinder block and will indicate "on" or "off" depending on the proximity to the magnet. Depending on the application, a variety of different magnetic proximity sensor technologies can be used to maximize performance, space, and reliability. According to the ALIF sensor type, there are different installation methods.