Global Trade Hub QUICK FIND

AB 1768-MO4SE

Price:	US$ 1
Minimum Order:	1
Payment Terms:	T/T
Port of Export:	XIAMEN

Product Details

Model No.:	AB 1768-MO4SE	Brand Name:	Allen Bradley

Certification:
Specification:	The Allen-Bradley 1768-M04SE is a CompactLogix SERCOS Interface module. This interface module integrates motion capability by allowing integration and control of up to Four (4) Kinetix drives. This module is compatible for use with 1768-L43 and 1768-L45 CompactLogix controllers. Product Type: SERCOS Interface Module Module Location: Din Rail or Panel Mount Bus Current draw @ 5.2 VDC: 969 mA Slot width: Single slot Fiber Optic Bend Radius Plastic cable without a jacket — 25 mm (0.98 in.); Plastic cable with a standard jacket — 25 mm (0.98 in.); Plastic cable with a nylon jacket — 40 mm (1.6 in.); Glass cable — 30 mm (1.2 in.) Fiber Optic Operating Temperature Plastic cable — -55…85 ¬C; Glass cable — -20…85 ¬C Fiber Optic Core Diameter Plastic cable — 980 ±²³´µm 60 ±²³´µm; Glass cable — 200 ±²³´µm 4 ±²³´µm Fiber Optic Connector F-SMA standard screw-type connector SERCOS Operating Cycle 4 M Data Rate and up to 2 drives — 0.5 ms Cycle Time; 4M Data Rate and up to 4 drives — 1 ms Cycle Time; 8 M Data Rate and up to 4 drives — 0.5 ms Cycle Time SERCOS Data Rate 4 M or 8 M SERCOS Class Class B (Position or Velocity) Connections consumed: Three (3) Allen-Bradley Drives compatibility: Kinetix 2000, Kinetix 6000, Kinetix 7000, and Ultra 3000 SERCOS servo drives. Supported No. of Drives: Up to Four (4) drives Power Dissipation 5.04 W Manufacturer Rockwell Automation Brand Allen-Bradley Part Number/Catalog No. 1768-M04SE Product Line CompactLogix Module Type 4 Axis Sercos Interface Module Shipping Weight 2 lbs. Shipping Dimensions 8X8X5 in. Series A and B Isolation Voltage 30 Volts Continuous Enclosure Open Backplane Current 1.4 Amps at 24 Volts Power Consumption 33.6 Watts UPC 10612598307552

Certification:

Specification:

The Allen-Bradley 1768-M04SE is a CompactLogix SERCOS Interface module. This interface module integrates motion capability by allowing integration and control of up to Four (4) Kinetix drives. This module is compatible for use with 1768-L43 and 1768-L45 CompactLogix controllers.

Product Type: SERCOS Interface Module
Module Location: Din Rail or Panel Mount
Bus Current draw @ 5.2 VDC: 969 mA
Slot width: Single slot
Fiber Optic Bend Radius Plastic cable without a jacket — 25 mm (0.98 in.); Plastic cable with a standard jacket — 25 mm (0.98 in.); Plastic cable with a nylon jacket — 40 mm (1.6 in.); Glass cable — 30 mm (1.2 in.)
Fiber Optic Operating Temperature Plastic cable — -55…85 ¬C; Glass cable — -20…85 ¬C
Fiber Optic Core Diameter Plastic cable — 980 ±²³´µm 60 ±²³´µm; Glass cable — 200 ±²³´µm 4 ±²³´µm
Fiber Optic Connector F-SMA standard screw-type connector
SERCOS Operating Cycle 4 M Data Rate and up to 2 drives — 0.5 ms Cycle Time; 4M Data Rate and up to 4 drives — 1 ms Cycle Time; 8 M Data Rate and up to 4 drives — 0.5 ms Cycle Time
SERCOS Data Rate 4 M or 8 M
SERCOS Class Class B (Position or Velocity)
Connections consumed: Three (3)
Allen-Bradley Drives compatibility: Kinetix 2000, Kinetix 6000, Kinetix 7000, and Ultra 3000 SERCOS servo drives.
Supported No. of Drives: Up to Four (4) drives
Power Dissipation 5.04 W
Manufacturer Rockwell Automation
Brand Allen-Bradley
Part Number/Catalog No. 1768-M04SE
Product Line CompactLogix
Module Type 4 Axis Sercos Interface Module
Shipping Weight 2 lbs.
Shipping Dimensions 8X8X5 in.
Series A and B
Isolation Voltage 30 Volts Continuous
Enclosure Open
Backplane Current 1.4 Amps at 24 Volts
Power Consumption 33.6 Watts
UPC 10612598307552

Packaging & Delivery

Packaging:	NEW
Delivery/Lead Time:	2-3DAY
Production Capacity:

Product Description

Sales Manager:Winnie Tian
----------------:at mooreplc.com
----------------:+86 180 0502 8963

The Allen-Bradley 1768-M04SE module is a CompactLogix 4-Axis SERCOS interface motion module. This SERCOS interface module is used by the Allen-Bradley Kinetix integrated-motion solution systems to accomplish difficult synchronized motion in several axes. This module enables the Kinetix system not only to depend on a PLC for motion control but to integrate the motor, drive, and even some actuators into the system with lower costs per axis of motion. The 1768-M04SE module works with servo drive controllers like the 1768-L43 (4 axes) and the 1768-L45 (8 axes) and servo drives like the 2093 Kinetix 2000, 2094 Kinetix 6000, 2099 Kinetix 7000 high-power, and the 2098 Ultra3000 SERCOS servo drives. This interface motion module covers 4 axes and 2 auxiliary feedback axes and supports 4 Mbps and 8 Mbps SECROS data exchange rates and its cycle time is usually below 0.5 milliseconds (this time never goes over 1 millisecond, even with a large number of axes attached).

The Allen-Bradley 1768-M04SE SERCOS interface module supports the position or velocity drive control modes. It uses a fiber-optic network and the 2090-SCEPxx-0 non-jacketed, polyvinyl chloride 2090-SCNPxx-0 nylon jacket, and the chlorinated polyethylene 2090-SCVPxx-0 standard jacket cables to connect to drives. The module can be mounted onto a DIN rail or to a panel. Its outer dimensions are 132 millimeters x 57 millimeters x 105 millimeters (5.2 inches x 2.23 inches x 4.14 inches). The total weight of the 1768-M04SE SERCOS interface module is 0.2 kilograms.

This module is used with the 1768 MicroLogix controllers such as 1768-L43 and 1768-L45 processors. If used with 1768-L43 processor, One (1) instance of 1768-M04Se may be used and Two (2) module installation with 1768-L45.

The 1768-M04SE is compatible for use with a variety of Allen-Bradley SERCOS drives including Kinetix 2000, Kinetix 6000, Kinetix 7000, and Ultra 3000 SERCOS servo drives. It can integrate and control up to Four (4) drives and consumes Three (3) connections. It supports data exchange rate of 4 Mbps and 8 Mbps with update times of 0.5 ms, up to Two (2) drives and 1 ms, up to Four (4) drives @ 4Mbps and 0.5 ms, up to Four (4) drives @ 8 Mbps. This interface module supports Position or velocity control modes with backplane current draw of 969 mA @ 5.2 VDC and 0 mA @ 24 VDC.

The 1768-M04SE Fiber Optic cable for establishing Kinetix drive connections. It may be used with plastic fiber-optic cables with catalog numbers 2090-SCEPxx-0 non-jacketed, chlorinated polyethylene 2090-SCVPxx-0 standard jacket, polyvinyl chloride 2090-SCNPxx-0 nylon jacket and Glass fiber-optic cables with catalog number 2090-SCVGxx-0 standard jacket, polyvinyl chloride.

Advantageous products we supply

PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider
DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation,
YOKOGAWA, Woodword, HIMA
TSI : Triconex , HIMA , Bently Nevada , ICS Triplex

You may interested
51303932-426 MU-TSIM12 SI FTA Modbus CE (1 ch)
51303932-428 MU-TSIA12 SI FTA Aln-Brd CE (1 ch)
51303932-476 MC-TSIM12 SI FTA Modbus CE CC(1 ch)
51303932-478 MC-TSIA12 SI FTA Aln-Brd CE CC 1 ch
51309204-125 MU-TLPA02 LLMux/SDI/SI pwr adpt FTA
51304516-100 MU-PSTX02 STI IOP CE 16ch
51304516-150 MC-PSTX02 STI IOP CE CC 16 ch
51304516-200 MU-PSTX03 STIM IOP CE (muti-var.)
51304516-250 MC-PSTX03 STIM IOP CE CC (mlti var)
51204168-100 MU-TAIH62 HLAI/STI FTA red scrw enh
51204168-150 MC-TAIH62 HLAI/STI FTA CC r scrw en
51204170-100 MU-TAIH22 HLAI/STI FTA red comp enh

Sales Manager:Winnie Tian
----------------:at mooreplc.com
----------------:+86 180 0502 8963

SUPPLIER PROFILE
Company:	MOORE AUTOMATION LTD
City/State	Xiamen,	Country:	Taiwan - Province of China
Business Type:	Export - Manufacturer / Trading Company	Established:	NA
Member Since:	2023	Contact Person	winnie Tian

SUPPLIER PROFILE

MOORE AUTOMATION LTD

City/State/Country -

Xiamen,

Taiwan - Province of China

Business Type -

Export - Manufacturer / Trading Company

Established -

Member Since -

2023

Contact Person -

winnie Tian