5" Hud Hud Head up Obdii Throttle Data, Single / Multi-Segment Alarms Display (ASH4)

Feature:
Main functions:
1. Car-adapted automatically, can use this product to all cars with interface of OBDII or EUOBD (car automatic diagnosis system), directly plug this product the interface.
2. Display car speed, engine speed, water temperature (voltage / throttle position), fuel consumption.
3. Can choose the normal display mode, the high-speed display mode, the automatic display mode.
4. Display area; 107 mm X 62 mm, Facilitating data reading.
5. Shutdown manually to avoid the power consumption of car, and retain the automatic shutdown at the same time.
6. Single-stage and four-stage alarm of car speed, facilitating the driving safety.
7. Engine speed alarm, facilitating timely shift and saving fuel consumption, especially for novice.
8. Automatic and manual brightness adjustment mode, NOT dazzling.

Preparation Before Installation And Use
1. Confirm your car brand and relevant car information. This product is only used for cars with OBD II(OR EU OBD) interface. Figure 1. Remarks: Open and look for the sticker under the engine hood, can use this product if it has the sticker with OBDII CERTIFIED. Figure 1.
2. Check if it has the automobile diagnostic socket under the steering wheel(most of car in China has this socket manufactured after the year 2006.
3. Identify the car's 16-pin diagnostic socket (Figure2), connecting the OBDII cable to the 16-pin diagnostic socket if it has this socket.
4. Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle an position.
5. The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensure that the information, such as car speed can be projected to the reflective film.