3D Projection Screen Film

Product Name：3D Projection Screen Film
Product Item No. KW003
Fire Resistant YES Mildew Proof YES
Cleanable YES Anti-static YES
Viewing Angle 80°(L&R40°) Gain 2
Suitable temperature -20° ~ +60° Product structure PVC film
Available width 2.5m/3.2m/3.66m Thickness 0.32mm±0.02mm
General Recommendations: ● Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ● Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ● Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ● After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ● Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23℃),storage time less than six months after production date.Film should be stored at room temperature (max.23℃,min.24h ) before processing.
Comments:Other colors,thickness,or embosses ,can be developed on demand.