3C-KL-300 Fusion Splicer

A Revolutionary Fusion Splice machine

Features

Core to core alignment by PAS technology ( PAS,Profile Alignment System)
Digital fusion splicer with automatic focus function

Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface



Specification



Model
3C-KL-300

Applicable fibers
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)

Fiber cleaved length
8~16mm(Coating diameter, 250µm)

16mm(Coating diameter,250 ~ 1000µm)

Fiber diameter
Cladding diameter,80 ~150µm

Coating diameter,100~ 1000μm

Fiber Count
Single

Fiber aligning method
Core or clad aligning

Image processing method
Digital

Actual average splice loss
0.02dB (SM), 0.01dB (MM),

0.04dB (DS), 0.04dB( NZDS)

Splicing time
Typical 9 sec,with standard SM fiber

Splicing mode
53(templet), 40(user)

Splice loss estimate
More accurate

Return loss
more than 60dB

Storage of splice result
4000 results,20 parameter per result

Fiber display and magnification
300X(X or Y view),150X(X and Y view)

Tube heating time
Typical 30 sec

Tube heating mode
9(templet), 24(user)

Tube heating temperature
Can be adjusted

Applicable Protection sleeve length
60mm, 40mm and a series of micro sleeves

Tension test
2N

Electrode life
2500

No.of splice/heating with battery
Typical 150 cycles (splice/tube heat) with inner Li-battery

Display screen
5.6 TFT inch color LCD monitor

Image change over
The fiber image is turned upside down

Terminals
USB 1.1 and VGA

Operating condition
0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50°C, respectively, Max. wind velocity of 15m/s

Power supply
AC 100-240V with AC adapter; inner Li-battery(6600mAH)

Dimensions
150mm(L) x150mm (W) x150mm (H)

Weight
2.7 Kg excluding battery,3.2 Kg including battery