30A MPPT Solar Charge Controller MPPT Solar Regulator

30A MPPT Solar Charge Controller

Model NO.: QWM-30150TC

Features:
· MPPT(Max. Power Point Tracking)

· 12V / 24V auto recognition

· Advanced maximum power point tracking technology to optimize using the
solar system.

· Peak conversion efficiency of 97 %, high Tracking efficiency of 99%

· Very fast sweeping of the entire I-V curve, several seconds tracking speed

· Widely used, automatic recognize day/night.

· Timer function with 1-15 hours option for street light.

· Unique dual timer function, enhance the flexibility of street light system.

Sealed, Gel and Flooded battery optional

Widely used, automatically recognize day/night

Diversified load control

RJ45 interface &optional meter

Electronic Protections:

· PV array short circuit

· Over discharging

· Over charging

· Load overload

· Load short circuit

· PV reverse polarity

· Battery reverse polarity


Specification:

Nominal system voltage 12VDC or 24VDC

Rated Charge current 45A

Rated Discharge current 20A

Max Battery voltage 32V

Max. Solar input voltage
TRACER 3215R 150VDC

Max. PV input power:
12V/520W
24V /1040W

Self-consumption: ≤ 100mA(24V)

NTTV: 5V; × 2/24V

DTTV: 6V; × 2/24V

Ambient temperature range -35 º Cto +55º C

Storage temperature -35º C to +80º C

Humidity 10%-90%(NC)

Enclosure IP30

Dimension 242 x 169x 91 / mm

Weight 2.05kg

Appliance:



Wiring method

Wiring steps: According to the positive(P) & negative(N) pole, first, connect the battery, followed by solar panels, and finally connected load.


Attention:

1, Only after the battery is connected and self-test normally, then connected to solar panels and load, if the self-test is abnormal, make sure the wiring is correct.

2, If the battery and the load are reversed, could lead to product damaged

3, Connecting solar panels in outdoor work, please cover the solar panels and then start connecting.

4, System grounding: Inside the controller, positive pole are connected together, so the voltage are the same, only allow positive ground if system grounding needed; If the controller is used in the automotive or other transport, the negative terminal of the battery is usually connected to the chassis, must ensure that the load and solar panels can not have any circuit contact with the automotive, otherwise the charge-discharge protection and electronic insurance will start protection.

QUEENSWING specialized in:


Modified Power Inverter:

USB car inverter: 100W, 150W, 200W, 300W, 500W, 1000W

Big capability: 1KW, 1.5KW, 2KW, 3KW, 4KW, 5KW, 6KW

UPS with charger: 1KW, 1.5KW, 2KW, 3KW

Pure Power Inverter:

Without charger: 300W, 600W, 1KW, 1.5KW, 2KW, 3KW, 4KW, 5KW, 6KW

With charger UPS: 300W, 350W, 400W, 500W, 600W, 700W, 1KW, 1.5KW, 2KW, 3KW,
4KW, 5KW, 6KW, 7KW, 8KW, 9KW, 10KW

Grid-tied Power Inverter: 1KW, 1.5W, 2KW, 3KW, 5KW, 10KW

PWM solar charge controller:12V 24V 48V 96V 192V 10A 20A 30A 40A 50A 60A 80A
100A 150A 200A

MPPT solar charge controller: 12V 24V 48V 10A 20A 30A 40A 50A 60A

Hybrid wind solar controller:12V 24V 200W 300W 400W 500W 600W

Battery: Maintenance-free lead-acid battery

Gel Battery: 12V 65A 100A 120A 150A 200A

Solar Panel: Mono & Poly crystalline solar panel in 10W ~300W

Website: */

*/


Contact us to get more informations:

Miss Donny

Skype: hanyinyan315

Mail: *

*