24v 7a lead acid battery charger for mobility scooter

24v 7a lead acid battery charger can be used on mobility scooter, electric golf buggy , electric motorcycle, e bike etc ev products. It is 3 stage cc cv floating charger , automatic smart intelligent, high efficiency and high saturation. It is good for your batteries lives.Easy to use and convenience.
Feature :
1. Aluminum case , light weight
2. Input voltage ; AC 100 V ~240 V 50 / 60 HZ
3. Max wattage : 240W
4. Charge mode : 3 stage ( CC CV float mode )
5. Charging : High saturation and efficiency
6. Input plug(power cords) : EU US UK AUS Italy Plugs etc ( can be Customized)
7. Output Connector : DC jack, XLR, JST, Cigar Lighter, Alligator Clips etc

Advantage :
1. full automatic transition of cc cv and float/ cut-off (cc cv 3 stage charger)
2. Precise limit of voltage& current, guarantee fully charged and avoid over charger
3. Protections : short circuit, over voltage, over-temperature, reverse polarity protections, Dc output isolated from AC input
4. High Efficient : > 85% PFC :0.96 Eco-friendly
5.Two led indicators led 1 Red ( power on ), led 2 Red/Green ( charging/full )
6. Safety and high quality, Advantage high frequency switching mode power supply technology
Charging Procedure :
1.First output power charger wire ends are connected to the battery anode and cathode , the charge indicator turns green, the connection is correct, otherwise the charge in question, please check the actual situation.
2.Then city power plug to socket , the indicator is red, charger will be into the charging state .
3.When the indicator light turns to green, the battery is charged to 95% , If you want to reach 100% , keep charging for 1 to 2 hours before end of charge.
4.When fully charged, disconnect the city power first, then disconnect the battery cable.