200Hz /10kvA intermediate frequency generating set

200Hz /10kvA intermediate frequency generating set
Structure:
 
One set of  4 KW asynchronous motor (3 phase,50Hz,380V,speed 1430 -1440r/min)
One set of 10kvA Synchro generator is an intermediate frequency  wide voltage separately excited generator. (125Hz,3phase,20- 240V, power factor:0.3)
One set of control cabinet  with  voltage regulator
One set of connection parts. (such as chassis,coupling and so on).
 
Main technical data and operationg condition:
Generally, the main body of a M+G set  will be fixed on a steel frame chassis .
Speed range of  asynchronous motor : 1430-1440rpm when 4 grade running.
Synchro generator is a 10 pole intermediate frequency wide voltage separately excited generator.(when the power supply frequency is 50Hz)
Generator excitation is separately excited way ：It can stabilivolt running under given voltage condition. (scorp: voltage is 20 -  240 under 125Hz  and Continuous adjusted setting).
Rated output power: (125Hz): 3 phase, 10kvA , 20-240V, power factor 0.3 (hysteresis).
Power factor: 0.4 (hysteresis)
Class of insulation: B
Class of  Protection :IP44
Installation type: IMB3
Cooling : IC01
Operating conditions:
Atmospheric pressure: 100kPa
Ambient temperature: 40℃
RH: less than 90% (20℃)
Altitude:≤1000m
Mode of operation :
Periodicity running (3 phase full load or 2 phase 6kvA full loading 1 hour, no loading 1 hour), continuous running: at least 4 hours.
Wave form distortion rate: ≤5% (no load line voltage).
setting range of output voltage: when 125Hz, 20 – 240V Continuous adjusting ( stabilivolt running under given voltage condition).
Noise ：≤108dB(A) (Voice level)
 
The CT, VT Test we can supplied , including CT, VT Routine Test, CT, VT Accuracy , Error Measurement Test, we have rich experience and perfect after-sale service. If you are interested in , you can call us at any time.