11W 1170mm DIP LED T5 tube

T5 LED Fluorescent Tube
Model No. K-T5117D-171
Dimension 15*1170mm
Lamp Type DIP F5
Led Qty 171LEDs
Power 11W
Input Voltage AC85-265V
Luminous Flux 1000-1050M
View Angle 120°
Color Temperature 3000-3500K 6000-6500K 7500-8000K
Power Factor ＞0.9
Material Adopt aluminum alloy as base, and the shine side uses PC and aluminum alloy holder
Lampholders type G9
Life time ≥50000 hours
Packaging 1174*230*230mm
Certification CE FCC RoHS CSA UL (In detecting)
Characters:
Energy saving: more than 60% energy can be saved compared with traditional fluorescent tube.
Adopt the high quality LED chips which have high lumen and low light loss is less than 5% during 3000 hours.
Strict quality control, light aging for 48 hours and complete inspection before shipping. Qualification rate is more than 98%.
Application:
Office, Supermarket, School, Hospital, Lobby, Hall, Square, Parking and so on.
Installment Illustration:
Install the match length bracket as the tube from the tube vertical direction.
Intervene the matching power wire to the one side (no positive and negative difference) of the bracket base as the picture shows, make the other side hang, then connecting AC220V power and would be lighted.
The product could not tear down the light tube only or install other bracket to lighten; it must match our company’s bracket to use.
This product can’t replace the conventional T5 fluorescent light, non-professional person should not take part the LED tube by your own.
This product can be used by series after put the two tubes in the bracket. You should buy the special connected line. There were at most 50 pieces in series.
6. Do not take apart the products, take apart the products would be without guarantee. If you have any questions please connect with us.